Arctic BioniX P120 A-RGB Pressure-Optimised 120 mm Fan with A-RGB (3 Fans + Controller Bundle) (ACFAN00156A)
Arctic BioniX P120 A-RGB Pressure-Optimised 120 mm Fan with A-RGB (3 Fans + Controller Bundle) (ACFAN00156A)
Brand : Arctic Cooling
SKU: SKU: ACFAN00156A
Low stock: 10 left
Couldn't load pickup availability
A-RGB for Full Colour Control
The 12 A-RGB LEDs installed in the BioniX P120 A-RGB are autonomously controllable. The BioniX P120 A-RGB is compatible with the common A-RGB standards of leading motherboard manufacturers for the simplest possible use. It can therefore be fully illuminated directly via the A-RGB motherboard connection or an external controller and synchronized with another hardware lighting.
Easy Installation and Extension via Daisy Chain
The ARCTIC BioniX P120 A-RGB has a modular cable management and uses two connections: a power-in and a connector output. ARCTIC uses a 7-pin connector for this, which forwards both the fan and lighting signals and considerably simplifies the cabling *. The included connector block also enables a wireless series connection.
* All necessary cables are included.
High-Quality Plain Bearing
Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced, increasing efficiency. In this way, less heat is generated, there is less bearing noise and the service life of the fan is extended.
Optimised for Static Pressure
With the BioniX P120 A-RGB, as with the entire P-series, special emphasis was placed on a focused airflow and high static pressure. The fan guarantees extremely efficient cooling, even with increased air resistance.
This makes the BioniX P120 A-RGB particularly suitable for use on covered case vents or inlets with filters.
Maximum Smoothness, Minimum Vibration
The operating noise of the newly developed ARCTIC motor is barely noticeable even at the lowest speed. Thanks to sinus magnetization, the P-Fan motor generates only 5% of the commutation vibrations of a conventional DC motor. In addition, the ARCTIC BioniX P120 A-RGB has rubber pads on its contact surfaces for further decoupling.
400 to 2300 rpm Regulated via PWM
Available as a Bundle or Individually
TECHNICAL SPECIFICATIONS & MANUAL
General Data
Airflow: 48 cfm | 81.55 m³/h
Static Pressure: 2.1 mmH2O
Noise Level: 0.45 Sone
Fan Frame: BioniX
Control Type: PWM PST
Connector: 7-Pin-Connector
Fan Bearing: Fluid Dynamic Bearing
Operating Ambient Temperature: 0—40 °C
Electric Characteristics
Typical Voltage: 12 V DC
Starting Voltage: 5 V
Current | Voltage: 0.13 A | 12 V
Cable Length: 400 mm
Size & Weight
Length: 120 mm
Width: 120 mm
Height: 30 mm
Weight: 209 g
