ARCTIC BioniX P140 Pressure-Optimised 140 mm Gaming Fan with PWM Sharing Technology

Brand : Arctic Cooling

SKU: SKU: ACFAN00128A

12 in stock

₱900.00

~~₱1,050.00~~ ₱900.00

Sale! Sold out

Quantity

Optimised for Static Pressure

During the development of the new BioniX P140, special emphasis was placed on a focused airstream and thus a high static pressure. The fan guarantees extremely efficient cooling, even with increased air resistance. Therefore, the BioniX P140 is particularly suitable for use on heatsinks and radiators.

More Efficient Technology

The motor is powered by a PWM IC of the newest generation, which allows the new BioniX P140 to run much more efficiently than its predecessors. This saves energy without compromising performance.

Maximum Quietness, Minimum Vibration

Even at low speeds, the operating sound of the new ARCTIC motor is barely noticeable. Due to sinus-magnetizing the new motor only creates about 5 % of the vibration from the commutation of a regular DC motor without a filter. Consequently, there is no need for rubber spacers due to the steady and smooth torque of the new motor.

.

200 to 1950 rpm Regulated via PWM PST

With a wide range of regulations and the PWM Sharing Technology (PST), the BioniX P140 fan speed can be controlled synchronously with all your other fans together. This keeps noise at a minimum while guaranteeing maximum cooling performance when needed.

High-Quality Bearing

Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. As a result, there is less heat development as well as less bearing noise, which means you can enjoy a longer service life from your fan.

Two Way Installation

Blow warm air out of the case
Draw cool air into your case

BioniX_P140_white-intake-exhaust-in-case

TECHNICAL SPECIFICATIONS & MANUAL

General Data

Performance
Fan Speed: 200—1950 rpm
Airflow: 77.6 cfm | 131.92 m³/h
Static Pressure: 2.85 mmH2O
Noise Level: 0.45 Sone

Fan Frame: BioniX
Control Type: PWM PST
Connector: 4-Pin Connector + 4-Pin Socket
Fan Bearing: Fluid Dynamic Bearing
Operating Ambient Temperature: 0—40 °C

Electric Characteristics
Typical Voltage: 12 V DC
Starting Voltage: 4.3 V
Current | Voltage: 0.15 A | 12 V DC
Cable Length: 400 mm

Size & Weight
Length: 140 mm
Width: 140 mm
Height: 28 mm
Weight: 181 g